-
关于我们
Mainly engaged in the research and development, production, and sales of electromechanical products such as CNC machine tools, ordinary lathes, and special-purpose machine tools -
产品中心
The company's main products include MC-H series horizontal machining centers, XH71 (VMC) series vertical machining centers, MC-VH series vertical and horizontal machining centers, CK series CNC lathes, C62 series horizontal lathes, Z50 series vertical drilling machines, etc. Many of these products have been recognized as Jiangsu Province High-Tech Products. -
新闻中心
From the known to the unknown, the exploration never stops -
Contact Us
联系我们
Since its establishment, the company has always adhered to the quality policy of "pursuing excellent quality and offering excellent service".
- Features
- Parameters
- Configuration
-
Features:
◆ Adopts a 45-degree inclined integral frame bed, which has good rigidity and is easy to remove chips;
◆ Simultaneous processing of both ends with one clamping, high processing efficiency and good precision;
◆ Equipped with a double spindle structure, which can be used for single spindle processing (short workpieces) and double spindle processing (long workpieces);
◆ The position of the auxiliary spindle is controlled by programming and can be adjusted freely according to the length of the workpiece;
◆ The extra-large stroke elastic chuck has strong adaptability to the blank and can easily clamp workpieces with large ends and small middle;
◆ Separate chuck design, the workpiece can be processed in the full range by replacing the chuck, without replacing the elastic chuck;
◆ The spindle has high rotation precision, good rigidity, and is driven by a high-speed, high-torque servo spindle motor;
◆ Left and right independent tool turrets, servo tool turrets or power tool turrets can be selected separately;
◆ The extra-large stroke design of the auxiliary spindle can clamp long workpieces in the middle of the two spindles, reducing the floor space of the machine tool;
◆ Equipped with an automatic lifting auxiliary clamping system, which can realize automatic workpiece clamping;
◆ Dual-channel CNC system, both sides can process synchronously or process different content;
◆ Fully enclosed internal and external protection, automatic lubrication, cooling and chip removal;
-
Project
Unit
Parameter
CM300-2000-T-S2
CM220-2000-T-S2
Clamping diameter
mm
Ф170-Ф280
Ф110-Ф220
Workpiece length
mm
600-2000
600-2000
Maximum machining diameter
mm
Ф300
Ф300
Maximum turning diameter
mm
Ф400
Ф400
Maximum workpiece weight
kg
1000
1000
Spindle bore
mm
Φ300
Φ220
Spindle speed range
rpm
0-250rpm (stepless speed regulation)
0-300rpm (stepless speed regulation)
Spindle drive mode
Toothed belt
Main motor power
Kw
18.5
18.5
Clamping form
Hydraulic collet
Elastic collet contraction range
mm
12.5mm (single side)
6mm (single side)
Spindle brake
Oil pressure
Turning tool size
mm
Square tool 2525; Round tool holder Φ40
Number of stations
12
12
Tool change method
Automatic tool change
Tool holder drive mode
Servo motor drives the tool turret to rotate and hydraulic locking
Tool change time (tool to tool)
S
≤0.8
≤0.8
Maximum speed of power turret tool
rpm
4500
4500
X1, X2 axis travel
mm
250
250
Z1 axis travel
mm
250
250
Z2 axis travel
mm
1500
1500
Auxiliary spindle left and right travel (B axis)
mm
1700
1700
X1, X2 axis rapid traverse
m/min
≥15
≥15
Z1, Z2 axis rapid traverse
m/min
≥20
≥20
Auxiliary spindle box movement
m/min
≥5
≥5
Machine tool structure
45 degree slant bed
Coolant tank volume
L
100
100
Filtration accuracy (when high pressure is optional)
μm
40
40
Internal cooling pressure (when high pressure is optional)
MPa
3
3
Internal cooling flow rate (when high pressure is optional)
L/min
25
25
Total electrical capacity
kVA
40
40
Machine tool weight
T
Approximately 8.5
Approximately 8.5
Length × width × height
M
6.2×2.2×2.35
6.2×2.2×2.35
Machine tool accuracy
Project
Unit
Parameter
Remarks
CM300-2000-T-S2
CM220-2000-T-S2
C1, C2 two spindle runout (radial runout and end runout)
mm
≤0.01
≤0.01
/
X-axis positioning accuracy
mm
≤±0.005
≤±0.005
Warm-up machine for 10 minutes to test
Z-axis positioning accuracy
mm
≤±0.01
≤±0.01
X-axis repeat positioning accuracy
mm
≤±0.003
≤±0.003
Z-axis repeat positioning accuracy
mm
≤±0.004
≤±0.004
B-axis positioning accuracy
mm
≤±0.05
≤±0.05
/
Guide rail straightness
≤0.03/1000
≤0.03/1000
/
Concentricity of C1 and C2 spindles
≤0.03
≤0.03
/
-
Main configuration • The main castings are resin sand castings
• Ball screw (Taiwan/PMI)
• All five axes use heavy-duty roller linear guides (Taiwan/PMI)
• Imported special screw bearings
• High-precision spindle bearings, configured with oil-air lubrication system
• Taiwan-made power turret or servo turret
• Electric lubrication system
• Fully enclosed internal and external protective cover and machine tool cooling system
• Three-color alarm light, external electronic handwheel
• Machine tool lighting device
• Air filtration system
• Chain chip conveyor
• Imported or domestic CNC system
key word:
Get a quote
Yangzhou Super Machine Tool Co.,Ltd.
Email:rly@yz-super.com(Domestic Sales) |lzj@yz-super.com(Export Sales)
Address: No. 198, Heye West Road, Yangzhou, Jiangsu, China
Tel:+86-514-87757238(Export Sales)
Tel:+86-514-87757235(Domestic Sales)
Copyright © Yangzhou Super Machine Tool Co.,Ltd.
Powered by www.300.cn | SEO