-
关于我们
Mainly engaged in the research and development, production, and sales of electromechanical products such as CNC machine tools, ordinary lathes, and special-purpose machine tools -
产品中心
The company's main products include MC-H series horizontal machining centers, XH71 (VMC) series vertical machining centers, MC-VH series vertical and horizontal machining centers, CK series CNC lathes, C62 series horizontal lathes, Z50 series vertical drilling machines, etc. Many of these products have been recognized as Jiangsu Province High-Tech Products. -
新闻中心
From the known to the unknown, the exploration never stops -
Contact Us
联系我们
Since its establishment, the company has always adhered to the quality policy of "pursuing excellent quality and offering excellent service".
- Features
- Parameters
- Configuration
-
Features:
◆ The base adopts a popular inverted "T" layout, and the overall structure has high rigidity. No overturning moment is generated during the entire stroke.
◆ The base castings are processed with high-precision five-sided gantry, which can complete five-sided milling, drilling, and tapping with only one clamping, reducing clamping errors and improving machining accuracy.
◆ The lead screw adopts a group of 60° angular contact ball bearings, double-supported and pre-tensioned to ensure transmission accuracy.
◆ High-frequency quenched sliding guide rails or heavy-duty high-precision roller guide rails are used, which can withstand large load cutting and have good shock absorption.
◆ Taiwan's high-precision spindle is adopted, and it is equipped with a spindle air curtain protection device to ensure stable spindle accuracy and long life.
◆ CNC rotary table, indexing table, and exchange table are optional.
-
Machine Model
MC-H125G
Item
Unit
Basic Parameters
Worktable size (length × width)
mm
1250×1250
Worktable indexing
°
1°×360
T-slot (number of slots X slot width X spacing)
mm
7×22×160
Maximum load on worktable
kg
4000
X-axis (left and right) travel
mm
2500
Z-axis (front and rear) travel
mm
1400
Y-axis (up and down) travel
mm
1600
Distance from spindle centerline to worktable surface
mm
100〜1700
Distance from spindle end face to worktable center
mm
400〜1800mm
Spindle taper hole
BT 50
Spindle motor power
kW
18.5/22kW(wide range)
Maximum spindle speed
r/min
4000
Rapid traverse speed (X, Y, Z)
m/min
16
Cutting feed rate (X, Y, Z)
mm/min
1-10000
Minimum machine setting unit
mm
0.001
Tool magazine capacity
pcs
60
Tool selection method
Random
Maximum tool size
(diameter × length)mm
125×500/250×500
Maximum tool weight
kg
25
Tool change time (tool to tool)
s
10
Maximum rotary table speed
r/min
3
X,Y,Z positioning accuracy
mm
0.025
X,Y,Z Repeat positioning accuracy
mm
0.010
B-axis positioning accuracy
"
12
B-axis repeat positioning accuracy
"
6
Machine dimensions (length × width × height)
cm
635×620×420
Machine weight
kg
32000
-
Standard configuration • Spindle and servo motor load display
• Spindle and servo overload protection
• Rigid tapping
• Fully enclosed protective cover
• Electronic handwheel
• Lighting device
• Double spiral chip conveyor
• Automatic lubrication system
• Electric cabinet thermostat
• Spindle ring jet cooling system
• RS232 interface
• Manual air gun
• Spindle taper hole cleaner
• ToolboxOptional configuration • Three-axis grating ruler detection device
• Workpiece measurement system
• Tool measurement system
• Spindle center spray cooling system
• CNC rotary table
• Chain chip conveyor
• Tool length setter and edge finder
• Oil-water separator
• Spindle cooling device
• Network function
key word:
Get a quote
Yangzhou Super Machine Tool Co.,Ltd.
Email:rly@yz-super.com(Domestic Sales) |lzj@yz-super.com(Export Sales)
Address: No. 198, Heye West Road, Yangzhou, Jiangsu, China
Tel:+86-514-87757238(Export Sales)
Tel:+86-514-87757235(Domestic Sales)
Copyright © Yangzhou Super Machine Tool Co.,Ltd.
Powered by www.300.cn | SEO