Horizontal lathe C6233/36/36V

key word:

Category:

Horizontal lathe

Engineering Consulting:

0514-87757238

Inquiry

Description

Machine Features / Features:

◆The surface of the bed rail is quenched and precision ground

◆Spindle support adopts precision tapered roller bearing

◆The main shaft gear is made of high quality and surface hardened and ground

◆Removable saddle provides a large processing range

◆Easy and easy to operate shifting mechanism

◆Easy to operate the cutter box has a variety of feeds to choose from and can drive a variety of threads

Machine specifications and main parameters Specification

technical parameter	Specification	model		Model
		C6233×1000/1340	C6236×1000/1440		C6236V
Processing range	Capacity
Maximum workpiece turning diameter on the bed	Swing over bed	330mm(13″)	356mm(14″)		356mm(14″)
Maximum workpiece turning diameter on the carriage	Swing over cross slide	195mm(7-5/8″)	220mm(8-5/8″)		220mm(8-5/8″)
Maximum turning diameter in the saddle groove	Swing in gap diameter	475mm(18-11/16″)	506mm(20″)		506mm(20″)
Active length of the saddle in front of the faceplate	Valid length of gap	145mm(5-11/16″)
Two top center distance	Admits between	1000mm(40″)
Bed width	Width of bed	206mm(8″)
Headstock	Headstock
Spindle end	Spindle nose	D1-4
Spindle through hole diameter	Spindle bore	38mm(1-1/2″)
Spindle bore taper	Taper of spindle bore	MT No.5
Spindle speed range	Range of spindle speed	16 changes 45～1800r/min		30～550r.p.m 155～3000r.p.m
Feed and thread	Feed and threads
Small carriage trip	Compound rest travel	95mm(3-3/4″)
Middle carriage stroke	Cross slide travel	180mm(7″)
Maximum section of the tool	Max. section of tool	16mm×16mm(5/8″×5/8″)
Large screw pitch	Lead screw thread	8T.P.I. or 4mm
Longitudinal feed	Longitudinal feeds range	0.0012″～0.0294″/rev（Inch lathe） or 0.043～0.653mm/rev （Metric lathe）
Horizontal feed	Cross feeds range	0.0004″～0.01″/rev（Inch lathe） or 0.027～0.413mm/rev（Metric lathe）
Metric thread range	Threads metric pitches	0.45～7.5mm（Inch lathe） or 0.4～7mm（Metric lathe）
Inch thread range	Threads inch pitches	4～112T.P.I. （Inch lathe）or 4～56T.P.I. （Metric lathe）
Tailstock	Tailstock
Tailstock sleeve diameter	Quill diameter	45mm(1-3/4″)
Tailstock sleeve stroke	Quill travel	120mm(4-3/4″)
Tail sleeve inner hole taper	Quill taper	MT No.3
Motor	Motor
Main motor (two speed)	Main motor power (double speeds)	1.5/2.4kW(2/3HP)
Cooling pump	Coolant pump power	0.04kW
Dimensions and weight	Dimension and weight
Dimensions (length × width × height)	Overall dimension (L×W×H)	182×74×124cm	182×74×125cm		182×74×125cm
Box size (length × width × height)	Packing size (L×W×H)	193×76×158cm	193×76×158cm		193×92×159cm
net weight	Net weight	700kg	730kg		750kg
Gross weight	Gross weight	820kg	860kg		880kg